AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateWhy San Mateo Homeowners Choose Lennox HVAC
We provide independent Lennox service in San Mateo, which means we diagnose and repair the equipment you already own without dealership quotas pushing the recommendation. Our technicians have up to 9 years of experience working on Lennox systems, from older Elite-series condensers to current Dave Lennox Signature Collection equipment, and we read Lennox fault codes rather than treating the system like a generic box. To be clear: we are not affiliated with, authorized by, or sponsored by Lennox. We’re an independent HVAC specialist, and heating and cooling is all we do.
San Mateo’s marine-layer climate shapes nearly every Lennox call we run here. Heating load dominates, and fog-driven damp in the low-lying flats near downtown and North Central makes combustion venting and heat-exchanger condition a real concern in older homes. Call (866) 260-3183. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust AC Repair San Mateo for Your Lennox HVAC?
Lennox builds equipment with its own control logic. Variable-capacity systems use communicating boards and thermostats that talk to each other in ways a single-stage unit never does, and a technician who hasn’t worked on them can misread a fault code as a failed compressor. Our team knows those patterns. When a Signature or Elite outdoor unit locks out, we pull the diagnostic codes, check the inverter module and board communication, then verify the actual cause before quoting anything.
Parts matter just as much. On communicating boards, inverter modules, and heat exchangers, we lean toward OEM parts where Lennox matching affects how the system runs. For capacitors, ignitors, and common wear parts, quality aftermarket parts often serve the system well and sometimes arrive faster. We won’t put a part in a Lennox machine that doesn’t fit it properly, and we don’t claim to stock OEM or genuine Lennox parts.
Warranty-safe practice is part of the job. We document what we find, use parts that match the equipment, and keep the repair within the terms the manufacturer sets, so a covered component doesn’t get voided by a shortcut. A San Mateo homeowner with a Lennox system under warranty deserves that care.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Lennox HVAC Problems We Fix in San Mateo
Lennox equipment fails in recognizable ways. Here’s what we see most in San Mateo homes.
- Communicating fault codes and compressor lockout. Signature and Elite variable-capacity systems depend on inverter boards and communicating thermostats. When the board loses communication or the inverter fails, the thermostat shows an E-code and the compressor locks out. We read the code, test the board and inverter, and confirm whether the fault is control-side or refrigerant-side before recommending parts.
- Condenser fan motors and run capacitors failing early. On Merit and Elite single-stage units, a weak run capacitor or a fan motor on its way out lets the compressor short-cycle on hot afternoons, especially during the summer heat spikes above the fog line in the western hills. A capacitor test and amp-draw check usually tells the story quickly.
- Cracked secondary heat exchangers and failed inducers. Older G-series and Elite furnaces commonly show a cracked secondary heat exchanger or a failed inducer motor, often with a sooted or restricted flue. In San Mateo’s damp, fog-cooled air, condensation and crawlspace moisture accelerate corrosion, so we inspect the exchanger and venting carefully. A cracked heat exchanger is a safety issue, not a repair to postpone.
- Leaking evaporator coils with formicary corrosion. Mid-2000s Lennox coils are known for pinhole leaks from formicary corrosion, which shows up as slowly drifting refrigerant charge. Pressure testing and a leak search confirm whether the coil is the culprit before anyone recommends a recharge that won’t hold.
- Refrigerant charge drift on older R-22 systems. Older systems lose charge over time as seals and coils wear. We pressure-test, find the leak, and explain options honestly rather than topping off a system that will leak again next season.
Lennox Parts & Our Repair-vs-Replace Approach
We match parts to the equipment in front of us. For inverter boards, communicating controls, and heat exchangers, OEM parts keep a Lennox system behaving as designed. For wear items, quality aftermarket parts can be the right call when lead time or cost favors it. We don’t stock OEM or genuine Lennox parts, but we source what fits and stands up. A common call is a Lennox Elite or Signature system that runs but won’t cool, with a fault code on the thermostat and the outdoor unit short-cycling. Pulling the Lennox codes, checking capacitor and amp draw, and pressure-testing the charge usually narrows it to a failed board, a bad capacitor, or a leaking coil. Past roughly 15 years with a failed compressor or coil, we quote both repair and replacement honestly. Call (866) 260-3183 for a free estimate.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We pull the Lennox diagnostic codes from the thermostat and control board, then test the electrical side: capacitors, amp draw, and board communication. On a furnace, we inspect the heat exchanger and venting.
- 2
Repair or install. We confirm the cause before quoting and explain repair versus replacement in plain terms. If a replacement is the right call, we coordinate the install with the written estimate in hand.
- 3
Test. After the repair, we run the system through a full cycle, check charge and airflow, and confirm the fault code clears.
- 4
Warranty. We document the work and the parts used so the repair stays consistent with the manufacturer’s terms. You leave with a written record of what was done.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in San Mateo
We service and install Lennox air conditioners and condensers, including variable-capacity and single-stage systems; Lennox gas furnaces, which dominate San Mateo’s heating load in the mild, rarely-freezing winters; and Lennox ductless mini-split and multi-zone outdoor units, which more homeowners here are choosing as they convert away from gas. Heat-exchanger inspection and refrigerant recharge are a routine part of that work. Because homes in the flats near North Central and Hayward Park often have no ducting sized for cooling, we look at the whole picture before recommending equipment, and we do it with an honest assessment rather than a sales pitch.
We Also Service These Brands
We’re not tied to a single brand. Alongside Lennox, we service Carrier and Trane, and our technicians diagnose the system in front of them rather than only the one brand a dealership pushes. That matters when you’re comparing repair versus replacement, or when a mixed system needs an honest answer. Heating and cooling is our entire focus, so every technician on every call is an HVAC specialist.
FAQs – Lennox HVAC Service in San Mateo
No. We are an independent Lennox service provider, not authorized, sponsored, or warranty-endorsed by Lennox. We’re just deeply familiar with how their equipment behaves. If a warranty claim requires the manufacturer, we’ll tell you so. Call (866) 260-3183 with questions.
Yes. We lean OEM for communicating boards, inverter modules, and heat exchangers, and use quality aftermarket for capacitors, ignitors, and common wear parts when lead time or cost favors it. We don’t claim to stock OEM or genuine Lennox parts, but we source what fits the equipment properly.
Most Lennox repairs, including a capacitor, board, or inducer swap, are handled in a single visit once the diagnosis is confirmed. If a part has to be sourced, we’ll give you a realistic timeline in the written estimate. Scheduling a replacement is set by the order and install date.
We service and install Lennox air conditioners and condensers, gas furnaces, and ductless mini-split and multi-zone systems. That includes variable-capacity and single-stage equipment. If you’re unsure what you have, we can identify it on-site.
Proper service with parts that match the equipment keeps a system consistent with the manufacturer’s terms. We document what we find and what we install, so the repair record is clear. If a component is covered, we’ll say so.
Typical estimated ranges for Lennox work in San Mateo are below. The written estimate sets the final price, and estimates are free.
| Service | Typical Estimated Range |
|---|---|
| AC Repair | $175 – $765 |
| Furnace Repair | $175 – $825 |
| AC Installation | $4130 – $8850 |
| Tune-Up | $95 – $235 |
Call (866) 260-3183 for an exact quote on your Lennox system.
Book Your Lennox Service in San Mateo, CA
Whether your Lennox system is showing a fault code or you’re weighing repair against replacement, we’ll give you a straight answer. Call (866) 260-3183 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One specialist team, nine major brands, and Lennox expertise you can count on in San Mateo.
Written by the team at AC Repair San Mateo.