AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted AC Installation for San Mateo Homeowners
When a twenty-year-old condenser finally gives out in the middle of a warm September, the real problem isn’t just heat. It’s figuring out who to trust with a $4,000-plus decision while your house is uncomfortable and every company you call wants to sell you something. We do AC installation across San Mateo, and we start the same way on every job: a load calculation on your actual house, an honest read on whether repair still makes sense, and a written fixed price before anything gets ordered.

Our technicians have up to 9 years of experience, and heating and cooling is the only trade we work in. No plumbing vans, no electrical side jobs, no crew learning air conditioning between calls. That focus shows up in the diagnostic work – static pressure readings, refrigerant charge verification, duct sizing checks – rather than a quick glance at the label. We answer 24/7, with fast dispatch from 7am to 7pm, and we can often get eyes on a failed system the same day. Call (866) 260-3183 for a free estimate.
Furnace Installation
Furnace Installation is the full removal and replacement of your home’s heating unit, including the venting, gas connection, and electrical work that goes with it. You need it when a furnace has cracked its heat exchanger, when repair costs approach half the price of new equipment, or when an older unit simply can’t keep up on a cold January morning in San Mateo. We size the replacement to your home’s actual heat load rather than matching whatever was there before, which matters in older San Mateo houses where a previous owner may have installed something oversized. Typical furnace installation in San Mateo runs $4,130-$8,850 depending on system size, efficiency tier, and whether ductwork or venting needs modification. The written estimate sets the final price.
What a Load Calculation Tells Us
Before we quote a furnace, we measure the house – square footage, window area, insulation levels, ceiling height, and how the rooms actually connect. That math decides the right capacity. An oversized furnace short-cycles, wears out faster, and leaves cold spots in the rooms furthest from the unit.
Coordinating Heat and Cooling
If your AC is nearing the end of its life too, replacing both at once lets us match the coil to the furnace and hit a higher efficiency rating than mismatched equipment can reach. It also means one install, one set of connections, and one date on the calendar.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
HVAC Installation
HVAC Installation means replacing the whole heating and cooling package together – furnace or air handler, condenser, evaporator coil, and the line set and thermostat that tie them together. It’s the right call when both halves of your system are the same age and both are failing, or when you’re moving from a single-speed setup to something with a variable-speed blower for quieter, steadier comfort. We handle this as one coordinated project rather than two separate jobs booked months apart. Because we install across Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, we’re matching equipment to your house and budget instead of steering you toward whatever brand a dealership agreement pushes. A full HVAC installation in San Mateo typically lands between $4,130 and $8,850, with the written estimate setting the final price.
Matching the Coil to the Condenser
A condenser rated at a high efficiency level only performs at that level when it’s paired with a matching coil and blower. We check the AHRI rating on the actual combination going into your home, not just the box the outdoor unit shipped in.
Thermostat and Controls
New equipment deserves controls that can use it. We set up the thermostat, confirm the staging works, and walk you through the schedule before we leave. A programmable or smart thermostat configured badly is a common reason new systems underperform.
Heat Pump Installation
Heat Pump Installation is the replacement of a system that both heats and cools by moving refrigerant rather than burning fuel, and it’s become a genuinely practical option in San Mateo’s mild climate, where winters rarely push a heat pump hard. You’d consider one when your existing AC is due for replacement and your furnace is on borrowed time, or when you want to get off gas entirely. The install involves the outdoor unit, indoor air handler or coil, refrigerant lines, electrical provisions, and a defrost control setup. Estimated pricing in San Mateo sits in the same $4,130-$8,850 band as other full-system work, depending on capacity and efficiency tier; the written estimate sets the final price. We’ll also tell you plainly if your ductwork or electrical panel can’t support the unit you’re considering.
Cold-Climate Ratings and Local Reality
Heat pump capacity drops as outdoor temperatures fall. San Mateo’s winters are gentle enough that most standard models handle the load without backup, but we still run the numbers on your specific house before recommending one.
Electrical and Refrigerant Considerations
Heat pumps often need a larger electrical circuit than the AC they replace, and the refrigerant line set has to be sized correctly for the new equipment. We check both during the assessment so there are no surprises mid-install.
Ductless Mini Split Installation
Ductless Mini Split Installation puts one or more wall-mounted air handlers in the rooms you actually want conditioned, connected by a small line set to an outdoor unit, with no ductwork involved. It’s the right answer for a room addition that never got ducts, a converted garage, a second story that runs hot while the rest of the house is fine, or a San Mateo home built before central air was standard. Each indoor head gets its own zone and its own thermostat, so you’re not paying to cool empty rooms. Typical ductless mini split installation in San Mateo falls within the $4,130-$8,850 range, scaling with the number of zones; the written estimate sets the final price.
Placement and Line Routing
Where the indoor head goes determines how well the room mixes air, and where the line set runs determines how the finished wall looks. We plan both before drilling anything, and we route lines to avoid the ugly exterior runs that make homeowners regret the install.
Multi-Zone Planning
Adding heads later is possible but rarely as clean as planning the whole system up front. We’ll map out which rooms need their own zone now and which can share one, so the system grows sensibly if your needs change.
AC Replacement
AC Replacement is the swap-out of an aging or failed condenser and coil for new equipment, and the honest trigger point is usually when a system hits the double-digit years and starts needing refrigerant topped off every season. R-22 systems in particular can’t be repaired economically anymore. Replacement also makes sense when you’re facing a compressor failure on a unit that’s already out of warranty, since the repair often approaches the cost of new equipment without resetting the clock. AC replacement in San Mateo typically runs $4,130-$8,850 depending on tonnage, efficiency tier, and whether the line set can be reused. The written estimate sets the final price, and we’re upfront when repair is the better financial call.
Telling Repair From Replacement
Age, refrigerant type, compressor condition, and how the rest of the system looks all factor in. A ten-year-old unit with a failed capacitor is a repair; a fifteen-year-old unit with a failed compressor usually isn’t. We give you both numbers and let you decide.
What Happens to the Old Equipment
We disconnect the old condenser and coil, recover the refrigerant properly, and haul the equipment away as part of the job. You don’t need to arrange a separate pickup or disposal.
Central Air Conditioning Installation
Central Air Conditioning Installation covers the full ducted system – outdoor condenser, indoor evaporator coil, refrigerant line set, and the connection into your existing ductwork and furnace or air handler. It’s the standard choice for a San Mateo house that already has ducts and wants whole-home cooling from a single thermostat. We see a lot of homes here where the ductwork was installed for heating only, so part of the job is checking whether the ducts can actually move enough air for cooling. Central air installation in San Mateo generally costs $4,130-$8,850 depending on system size, efficiency, and any duct modifications needed. The written estimate sets the final price.

Checking Ducts Before You Buy
Undersized or leaky ducts will sabotage even a well-matched condenser. We inspect the duct system during the assessment and tell you if remediation needs to be part of the budget, rather than letting you find out when the house never quite cools.
Choosing the Right Efficiency Tier
Higher efficiency costs more up front and saves more over the life of the system, but the math only works if you plan to stay in the house long enough to see the return. We’ll run that comparison with you plainly.
Brands We Service
We install and service equipment from nine major manufacturers, and that range matters because it keeps our recommendations honest. We work on Rheem systems regularly and know how their coil designs and cabinet layouts differ from the competition, which shortens the install day and avoids surprises once the unit is on the pad. Daikin equipment, including their inverter-driven models, has its own commissioning requirements, and we follow them precisely because that’s where efficiency claims are either met or lost.
York and Bryant units show up in plenty of San Mateo homes, and we’ve learned where each one tends to wear – whether it’s a control board quirk or a coil configuration that complicates a retrofit. Because we’re not tied to a single-brand dealership agreement, we recommend the equipment that fits your house and your budget, not the line a manufacturer is paying us to move. Whether you have Rheem or any other make, we can help. To talk through options, call (866) 260-3183.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Warm air from the vents. If the system is running but the air coming out isn’t cold, the refrigerant charge or compressor may be failing. Left alone, a low-charge system can destroy the compressor, turning a repair into a full replacement.
- Ice on the indoor coil or refrigerant line. Frost on the lines means restricted airflow or low refrigerant, not a sign the system is cooling well. Shut it down and have it checked before the compressor takes the damage.
- Refrigerant needing repeated top-offs. A sealed system shouldn’t lose charge. If you’re paying for refrigerant every season, there’s a leak, and the money spent topping it off is money not going toward the replacement you’ll eventually need.
- Loud or grinding noises from the outdoor unit. Bearing noise, rattling, or hard-starting all point to mechanical wear inside the condenser. These tend to get worse quickly and cost more to fix the longer they run.
- Rising energy bills with no other explanation. A system losing efficiency works harder for the same result. Sudden bill jumps often trace back to a failing blower motor, a dirty coil, or a compressor drawing more current than it should.
Our Process, Step by Step
- 1
Phone assessment and booking. We ask about the system’s age, refrigerant type, and symptoms so we arrive prepared. Call (866) 260-3183. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
On-site evaluation. We inspect the existing equipment, measure the house for a load calculation, check duct sizing and static pressure, and confirm the electrical panel can support the replacement. This is where an honest install starts.
- 3
Written estimate. You get a fixed price in writing, with equipment options at different efficiency tiers and a clear accounting of any duct or electrical work. The estimate is free and there’s no pressure to sign on the spot.
- 4
Scheduling and installation. Once you approve, we order the equipment and set an install date. On the day, we protect floors, recover the old refrigerant properly, and commission the new system to manufacturer spec, verifying charge and airflow rather than guessing.
- 5
Walkthrough and paperwork. We demonstrate the thermostat, confirm the temperature split across the coil, and hand over the warranty registration and documentation. If rebate or financing paperwork applies, we help you get it filed correctly.
How Much Does AC Installation Cost in San Mateo?
A typical AC installation in San Mateo runs $4,130-$8,850, and the spread comes down to system size, efficiency tier, and how much supporting work your house needs. A straightforward replacement of a mid-efficiency ducted system in a standard single-family home tends to land toward the lower half of that range. A larger home, a high-efficiency variable-speed system, or one that needs a new line set or duct modifications pushes toward the top. If you’re comparing central air against a ductless setup for a room addition, the ductless option often makes more financial sense than extending ductwork.
What affects the price: equipment capacity and efficiency rating, whether the existing line set can be reused, duct condition, electrical provisions at the panel, and thermostat or controls. Two houses on the same block can come in thousands apart for those reasons alone.
How to avoid overpaying: get the load calculation in writing, not a rule-of-thumb “one ton per 500 square feet” guess. Ask whether the quote includes refrigerant recovery and haul-away. And be wary of a price that arrives before anyone has measured the house – that’s a sales number, not an estimate.
Every free estimate includes the on-site evaluation, the load calculation, and a written fixed price. Call (866) 260-3183 – estimates are free. You can also read about AC Repair San Mateo if you’re not sure whether repair is still on the table.
| Scenario | Typical Estimated Range |
|---|---|
| AC installation (full system) | $4,130-$8,850 |
| AC repair | $175-$765 |
| Furnace repair | $175-$825 |
| Tune-up | $95-$235 |
The written estimate sets the final price.
Our Service Area Near San Mateo
We install AC systems throughout San Mateo and the surrounding Peninsula and South Bay cities, including Hayward, Fremont, Santa Clara, Sunnyvale, Campbell, Saratoga, Los Gatos, Monte Sereno, and Burbank. Response times depend on traffic and the day, but we dispatch from 7am to 7pm, Sunday through Friday, and can often get an assessment scheduled the same day. If you’re comparing options across the region, our AC installation page covers the East Bay side, and the AC installation page covers South Bay homes.
Serving San Mateo, CA – Our Local Coverage Area
We serve San Mateo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About AC Installation in San Mateo
AC installation is the removal of your existing cooling equipment and the supply and fitting of a new condenser, evaporator coil, refrigerant line set, and controls, connected to your home’s ductwork. It includes the load calculation that determines the right capacity, refrigerant recovery on the old system, and commissioning of the new equipment. For ductless or heat pump systems, the scope adjusts to fit the equipment type.
Most residential AC installations take one full day, sometimes two if duct modifications or electrical panel work is needed. A straightforward condenser and coil swap is on the shorter end. Ductless mini split installs vary with the number of zones, since each indoor head adds line routing and mounting time. We give you a realistic window with the written estimate rather than promising a half-day.
Typical AC installation in San Mateo runs $4,130-$8,850, depending on system size, efficiency tier, and whether line set or duct work is needed. A basic mid-efficiency replacement sits near the bottom of that range; a high-efficiency system in a larger home with duct modifications sits near the top. The written estimate sets the final price. Call (866) 260-3183 for an exact quote – estimates are free.
Yes, we install and service Daikin, Rheem, Carrier, Trane, Lennox, Goodman, York, Bryant, and American Standard equipment. That breadth means we diagnose and replace the system in front of us rather than steering you toward one brand we’re tied to. When we recommend a unit, it’s matched to your home and budget.
We can often schedule a same-day assessment, depending on the day’s load and how far out the address is. We answer 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 260-3183 to check availability.
New equipment carries the manufacturer’s warranty, and registration requirements vary by brand, so we help you get the paperwork filed correctly at handover. Labor coverage is spelled out in the written estimate so you know exactly what’s covered and for how long before you approve the job. Ask us to walk through the warranty terms specific to the equipment you choose.
Clear the area around the indoor air handler and the outdoor condenser pad, and make sure we have a path to both. If your thermostat is on a smart-home network, have the login handy. Move anything fragile away from the access route. Beyond that, you don’t need to do much – we handle the refrigerant recovery, the connections, and the cleanup.
Schedule Your AC Installation Service in San Mateo Today
If your system is failing, oversized, or simply past the point where repairs make sense, we’ll give you a load calculation and a written fixed price with no sales pressure attached. Heating and cooling is all we do, so you’re getting a specialist either way. Call (866) 260-3183 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You can also read more about AC installation before you call.
Written by the team at AC Repair San Mateo.