AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for San Mateo Homeowners
When your furnace quits in January, the house goes cold fast, and San Mateo’s damp winter air makes a dead heater feel worse than the thermometer suggests. We handle furnace repair for homeowners across San Mateo, from the flats near Central Park to the hillside streets above Alameda de las Pulgas. Our technicians have up to 9 years of experience, and heating and cooling is all we do, so the person at your door diagnoses furnaces every day rather than splitting time between plumbing and HVAC. Same-day service is often possible when you call in the morning. Call (866) 260-3183. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Furnace Maintenance
Furnace Maintenance is the scheduled check that keeps a working heater from turning into a mid-winter breakdown. In San Mateo, furnaces run through months of cool, humid weather and then sit idle, which is exactly the pattern that lets dust, worn belts and a dirty flame sensor build up unnoticed. We recommend it once a year, ideally before the first cold snap, so small issues get caught while they’re still cheap to fix. Our technicians inspect the heat exchanger, burners, blower and electrical connections, then give you a written report of what we actually found. A tune-up in San Mateo typically runs $95 – $235, and the written estimate sets the final price.
What a Maintenance Visit Covers
We clean the burners and blower, check the flame sensor and igniter, test the safety switches, and confirm airflow through the system is where it should be. You get a plain-language account of anything we find and what it would cost to address, with no pressure to approve it on the spot.
How Often Your Heater Needs It
Once a year is right for most San Mateo homes. If you have pets, a lot of dust, or a system that’s been running hard, a second look mid-season is worth it. Skipping maintenance rarely causes a problem immediately; it shows up as a no-heat call later.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair covers the systems that both heat and cool your home through one unit, and when they fail, the whole house swings out of comfort in either direction. A heat pump that blows cool air in heating mode, ices over, or short-cycles is usually dealing with a reversing valve, defrost board, refrigerant charge or blower problem, and those need a technician who understands both sides of the system. We service heat pumps across San Mateo and diagnose the actual fault rather than guessing at parts. Typical heat pump repairs run $175 – $825, and the written estimate sets the final price. You can also read about AC Repair San Mateo if the cooling side is the one acting up.
Heating Mode Failures
When a heat pump heats but weakly, or not at all, the culprit is often the reversing valve or a defrost cycle that isn’t completing. These show up as a unit that runs constantly without warming the house. We test the components in sequence so the repair targets the real cause.
Year-Round Service on One System
Because a heat pump handles heating and cooling, it deserves the same attention in both seasons. We can look at the whole unit at once, which avoids the mismatched repairs that happen when two different contractors touch the same system.
Heating Repair
Heating Repair is the general service for any furnace or heating system that won’t keep your home warm, whatever the make or fuel type. If you’re getting lukewarm air, strange noises, or a system that shuts off before the house reaches temperature, that’s the signal to call. We work on Rheem and York equipment as readily as anything else, and being brand-agnostic means we recommend what fits your home and budget rather than what a dealership agreement pushes. Heating repairs in San Mateo typically fall in the $175 – $825 range, with the written estimate setting the final price. Call (866) 260-3183 and we’ll get a technician out.
Common Causes We Track Down
Weak heat often traces to a clogged filter, a failing igniter, a blower motor on its way out, or a thermostat sending the wrong signal. We test each in order so you’re not paying to replace parts that were never the problem. The diagnosis comes before any recommendation.
When Repair Makes More Sense Than Replacement
If the system is otherwise sound and the repair is straightforward, fixing it is usually the right call. We’ll tell you honestly when a repair is throwing money at a failing unit, and when it will buy you several more seasons. You decide; we don’t push.
Boiler Repair
Boiler Repair addresses hot-water and steam heating systems that lose pressure, stop heating, or leak, and it’s work that calls for a technician comfortable with the specific components involved. Some older San Mateo homes heat through radiators or baseboard fed by a boiler rather than forced air, and those systems have their own failure points: circulator pumps, expansion tanks, pressure valves and zone controls. We diagnose the fault before touching anything and explain what we found. Boiler repairs typically run $175 – $825, and the written estimate sets the final price. Gas-fired boilers carry real safety considerations, so we treat them with the care they demand.
Pressure and Circulation Problems
A boiler that won’t hold pressure or won’t push hot water to the radiators usually has a failing circulator, a bad expansion tank or a stuck zone valve. We test each part rather than assuming. Restoring proper circulation is usually the fix.
Leaks and Component Wear
Small leaks around fittings, valves or the heat exchanger tend to get worse, not better, and a leaking boiler can waste fuel and water. We locate the source and give you a clear picture of the repair. Anything involving the gas side or the combustion chamber is left to a trained technician for good reason.
Gas Furnace Repair
Gas Furnace Repair is the specialized work of diagnosing and fixing gas-fired heating systems, from ignition faults to blower failures, and it’s the most common furnace type we see in San Mateo homes. If you smell gas, hear a boom on startup, or the burner won’t stay lit, treat it as urgent and call right away: turn off the gas supply if you can do so safely and get everyone out of the house until a technician checks it. We work on Daikin and Bryant equipment along with every other major brand. Gas furnace repairs typically run $175 – $825, and the written estimate sets the final price.
Ignition and Flame Problems
A furnace that clicks but won’t light usually has a failing igniter, a dirty flame sensor, or a gas valve issue. These are common and usually repairable. We test the ignition sequence end to end and flag anything that touches the gas train as a job for a trained professional, which it is.
Safety Checks Before the Repair
Any gas furnace visit includes a look at the heat exchanger and venting, because a cracked exchanger can let combustion gases into your home. This is exactly the kind of check we won’t skip. It protects your household, and it’s part of doing the job right.
Furnace Tune Up
Furnace Tune Up is the focused service visit that cleans, tests and adjusts your heater so it runs efficiently and safely through the season, and it’s worth booking before the cold arrives. In San Mateo, where the heating season is mild but long, a furnace that’s been neglected for a couple of years can lose efficiency quietly. Our technicians clean the burners and blower, check the flame sensor and igniter, verify the safety controls and confirm airflow, then hand you a written report of what we found. A tune-up in San Mateo typically costs $95 – $235, with the written estimate setting the final price. Technicians are not paid on what they sell.
Best Time to Book
Late fall, before the first stretch of cold nights, is ideal, because that’s when you want the system checked rather than discovered to be failing. Booking early also means an easy appointment instead of a scramble. It’s the simplest way to avoid a no-heat call in January.

What the Tune Up Prevents
Regular tune-ups catch worn belts, dirty sensors and airflow problems before they turn into breakdowns. They also keep the system running closer to its rated efficiency. A little upkeep now saves a bigger repair later.
Emergency Furnace Repair
Emergency Furnace Repair is for the no-heat calls that can’t wait: the furnace dies on a cold night, the house is dropping toward uncomfortable, or a system is making a noise or smell that worries you. In a mild climate like San Mateo a failed heater is rarely life-threatening, but for infants, older adults and anyone with health concerns, a cold house is still a real problem, so we treat it that way. We answer 24/7, and we dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Emergency-type repairs typically run $175 – $825, with the written estimate setting the final price.
What Happens When You Call
Tell us what the furnace is doing and what make it is so we arrive with the right information. We prioritize no-heat calls and dispatch a technician as quickly as we can. Fast dispatch runs from 7am to 7pm, Sunday through Friday.
Safety First on a Gas System
If you smell gas or see soot or scorching, shut off the gas if you can do so safely and air out the house before calling. Don’t keep resetting a furnace that keeps tripping. A trained technician should look at anything involving the gas side or combustion.
Brands We Service
We work on the brand you already have, not just the ones we sell. Rheem furnaces are common in this area, and we know their ignition and control-board quirks well enough to diagnose quickly. York systems bring their own patterns, especially around the blower and limit switches, and we’ve serviced enough of them to recognize the usual failure points. Daikin equipment, including its heat pump lines, rewards a technician who understands inverter controls and multi-stage operation. Bryant furnaces are widely installed in Bay Area homes, and we’re comfortable with their control boards and airflow setup.
That breadth matters because a brand-agnostic approach means the recommendation you get is based on your home and your budget, not on a dealership agreement or a manufacturer incentive. We don’t favor one make over another; we diagnose the system in front of us and tell you what it needs. Whether you have Rheem, York, Daikin, Bryant or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- You smell gas. A rotten-egg smell near the furnace is a safety issue, not a wait-and-see. Shut off the gas if you can do so safely, get out, and call right away. Gas problems belong to a trained technician, always.
- The furnace runs but doesn’t heat. Air that stays cool while the system runs usually points to an ignition or flame-sensor fault. It won’t fix itself, and continuing to run it wastes fuel. This is a clear same-day call.
- You hear banging, rattling or screeching. Loud noises often mean a failing blower, loose component or worn belt. Left alone, small noises turn into bigger repairs. Get it checked before it fails completely.
- The system short-cycles. A furnace that turns on and off every few minutes is usually fighting a limit switch, airflow problem or oversized unit. Short-cycling wears parts out fast and runs up your bill.
- Soot, scorch marks or a yellow flame. A healthy gas flame is blue; yellow or sooty signs suggest incomplete combustion, which needs professional attention. This one carries real safety weight, so don’t put it off.
Our Process, Step by Step
- 1
We take your call and get the details. We ask what the furnace is doing and what make it is so we arrive prepared. That saves time on the diagnosis.
- 2
We diagnose before we recommend. A technician tests the system in sequence, from the thermostat signal through ignition, blower and safety controls, and uses combustion and airflow readings to confirm what’s actually wrong.
- 3
We explain what we found in plain language. You hear the diagnosis and the options, without a sales pitch. Honest assessment comes before any recommendation.
- 4
You get a written estimate. The price is set per job by the written estimate, so there are no surprises. You approve it before any work starts.
- 5
We make the repair and confirm it’s running right. After the fix we test the system to make sure it heats properly and safely. If a replacement makes more sense than a repair, we’ll tell you, and we can pair that with furnace repair or a coordinated furnace repair conversation about matching your heating and cooling.
How Much Does Furnace Repair Cost in San Mateo?
Furnace repair in San Mateo typically runs $175 – $825, depending on what’s actually wrong and which parts are involved. A straightforward fix, like a flame sensor cleaning or a thermostat adjustment, usually lands near the lower end. A failed blower motor, control board or heat exchanger issue pushes toward the higher end because of the parts and labor involved. If you’re looking at a full replacement instead, that’s a separate conversation, and we’ll walk you through the options.
Several things move the number. The age and make of the system matters, since parts for older or less common units can take longer to source. The type of fault matters more: an ignition problem is usually quicker to diagnose than an intermittent electrical issue. Access to the unit can add time if it’s tightly installed. What we won’t do is pad the bill with parts you don’t need, and because we’re not tied to a single brand, our recommendations come from your home’s needs, not a dealership quota.
To avoid overpaying, get the diagnosis first and ask what the estimate covers, including parts and labor. A free estimate from us includes the diagnostic findings, a clear explanation of the repair, and a written price before you commit. The written estimate sets the final price, so there’s nothing tacked on afterward. Call (866) 260-3183 for an exact quote. Estimates are free. We answer 24/7.
Our Service Area Near San Mateo
We serve San Mateo and the surrounding Peninsula and South Bay communities, including Hayward, Sunnyvale, Fremont, Santa Clara, Saratoga, Burbank, Campbell, Monte Sereno and Los Gatos. Response times vary by location and how busy the day is, but we prioritize no-heat calls and dispatch from 7am to 7pm, Sunday through Friday. Whether you’re nearby or a little further out, the same trained HVAC specialists handle the work. Heating and cooling is all we do, so you get a specialist on every call.
Serving San Mateo, CA – Our Local Coverage Area
We serve San Mateo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in San Mateo
Furnace repair is the diagnosis and fixing of whatever is keeping your heating system from running properly, whether that’s ignition, airflow, a blower, a control board or a safety component. It starts with testing the system to find the true cause, then repairing it. We service Rheem, York, Daikin, Bryant and other major brands. Call (866) 260-3183 for a free estimate.
Most repairs are finished in a single visit, often within a couple of hours depending on the fault and whether a part is on hand. Complex or intermittent problems can take longer to diagnose. We’ll give you a realistic picture when we assess the system. Call (866) 260-3183 to get scheduled.
Typical furnace repairs run $175 – $825, with the written estimate setting the final price. The range depends on the part involved and the complexity of the fault. A tune-up, by comparison, typically runs $95 – $235. Call (866) 260-3183 for an exact quote. Estimates are free.
Yes. We’re certified to install and service nine leading brands, including Rheem, York, Daikin and Bryant, along with Carrier, Trane, Lennox, Goodman and American Standard. Because we’re brand-agnostic, you get a recommendation based on your home, not a single-brand dealership agreement. Call (866) 260-3183 to book.
Same-day service is often possible, especially for no-heat calls, and we prioritize those. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 260-3183.
Repair work is backed, and any parts involved carry the manufacturer’s coverage where it applies. We’ll explain exactly what’s covered before the work starts, and the written estimate spells out the details. Ask us anything before you approve. Call (866) 260-3183 for the specifics on your job.
Clear access to the furnace, note the make and model if you can find it, and write down what the system is doing, including any noises or smells. If you smell gas, shut it off if you can do so safely and air out the house first. Tell us what you’ve noticed when you call (866) 260-3183.
Schedule Your Furnace Repair Service in San Mateo Today
If your furnace isn’t heating the way it should, don’t wait for it to fail completely. Call (866) 260-3183 for a free, no-obligation estimate from a team that does heating and cooling and nothing else. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Honest assessment first, written price before any work, and nine major brands covered. One call is all it takes.
Written by the team at AC Repair San Mateo.