Furnace Repair in San Mateo, CA | AC Repair San Mateo

Furnace Repair in San Mateo - Same-Day Repair, Priced Before We Start

Same-day diagnosis with the repair price given before any work starts, and an honest repair-versus-replace answer when the system is near the end of its life.

We answer 24/7

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Trusted Furnace Repair for San Mateo Homeowners

When your furnace quits in January, the house goes cold fast, and San Mateo’s damp winter air makes a dead heater feel worse than the thermometer suggests. We handle furnace repair for homeowners across San Mateo, from the flats near Central Park to the hillside streets above Alameda de las Pulgas. Our technicians have up to 9 years of experience, and heating and cooling is all we do, so the person at your door diagnoses furnaces every day rather than splitting time between plumbing and HVAC. Same-day service is often possible when you call in the morning. Call (866) 260-3183. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

HVAC technician cleaning a furnace flame sensor for routine maintenance in San Mateo, CA

Call (866) 260-3183

Furnace Maintenance

Furnace Maintenance is the scheduled check that keeps a working heater from turning into a mid-winter breakdown. In San Mateo, furnaces run through months of cool, humid weather and then sit idle, which is exactly the pattern that lets dust, worn belts and a dirty flame sensor build up unnoticed. We recommend it once a year, ideally before the first cold snap, so small issues get caught while they’re still cheap to fix. Our technicians inspect the heat exchanger, burners, blower and electrical connections, then give you a written report of what we actually found. A tune-up in San Mateo typically runs $95 – $235, and the written estimate sets the final price.

What a Maintenance Visit Covers

We clean the burners and blower, check the flame sensor and igniter, test the safety switches, and confirm airflow through the system is where it should be. You get a plain-language account of anything we find and what it would cost to address, with no pressure to approve it on the spot.

How Often Your Heater Needs It

Once a year is right for most San Mateo homes. If you have pets, a lot of dust, or a system that’s been running hard, a second look mid-season is worth it. Skipping maintenance rarely causes a problem immediately; it shows up as a no-heat call later.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Heat Pump Repair

Heat Pump Repair covers the systems that both heat and cool your home through one unit, and when they fail, the whole house swings out of comfort in either direction. A heat pump that blows cool air in heating mode, ices over, or short-cycles is usually dealing with a reversing valve, defrost board, refrigerant charge or blower problem, and those need a technician who understands both sides of the system. We service heat pumps across San Mateo and diagnose the actual fault rather than guessing at parts. Typical heat pump repairs run $175 – $825, and the written estimate sets the final price. You can also read about AC Repair San Mateo if the cooling side is the one acting up.

Heating Mode Failures

When a heat pump heats but weakly, or not at all, the culprit is often the reversing valve or a defrost cycle that isn’t completing. These show up as a unit that runs constantly without warming the house. We test the components in sequence so the repair targets the real cause.

Year-Round Service on One System

Because a heat pump handles heating and cooling, it deserves the same attention in both seasons. We can look at the whole unit at once, which avoids the mismatched repairs that happen when two different contractors touch the same system.

Heating Repair

Heating Repair is the general service for any furnace or heating system that won’t keep your home warm, whatever the make or fuel type. If you’re getting lukewarm air, strange noises, or a system that shuts off before the house reaches temperature, that’s the signal to call. We work on Rheem and York equipment as readily as anything else, and being brand-agnostic means we recommend what fits your home and budget rather than what a dealership agreement pushes. Heating repairs in San Mateo typically fall in the $175 – $825 range, with the written estimate setting the final price. Call (866) 260-3183 and we’ll get a technician out.

Common Causes We Track Down

Weak heat often traces to a clogged filter, a failing igniter, a blower motor on its way out, or a thermostat sending the wrong signal. We test each in order so you’re not paying to replace parts that were never the problem. The diagnosis comes before any recommendation.

When Repair Makes More Sense Than Replacement

If the system is otherwise sound and the repair is straightforward, fixing it is usually the right call. We’ll tell you honestly when a repair is throwing money at a failing unit, and when it will buy you several more seasons. You decide; we don’t push.

Boiler Repair

Boiler Repair addresses hot-water and steam heating systems that lose pressure, stop heating, or leak, and it’s work that calls for a technician comfortable with the specific components involved. Some older San Mateo homes heat through radiators or baseboard fed by a boiler rather than forced air, and those systems have their own failure points: circulator pumps, expansion tanks, pressure valves and zone controls. We diagnose the fault before touching anything and explain what we found. Boiler repairs typically run $175 – $825, and the written estimate sets the final price. Gas-fired boilers carry real safety considerations, so we treat them with the care they demand.

Pressure and Circulation Problems

A boiler that won’t hold pressure or won’t push hot water to the radiators usually has a failing circulator, a bad expansion tank or a stuck zone valve. We test each part rather than assuming. Restoring proper circulation is usually the fix.

Leaks and Component Wear

Small leaks around fittings, valves or the heat exchanger tend to get worse, not better, and a leaking boiler can waste fuel and water. We locate the source and give you a clear picture of the repair. Anything involving the gas side or the combustion chamber is left to a trained technician for good reason.

Gas Furnace Repair

Gas Furnace Repair is the specialized work of diagnosing and fixing gas-fired heating systems, from ignition faults to blower failures, and it’s the most common furnace type we see in San Mateo homes. If you smell gas, hear a boom on startup, or the burner won’t stay lit, treat it as urgent and call right away: turn off the gas supply if you can do so safely and get everyone out of the house until a technician checks it. We work on Daikin and Bryant equipment along with every other major brand. Gas furnace repairs typically run $175 – $825, and the written estimate sets the final price.

Ignition and Flame Problems

A furnace that clicks but won’t light usually has a failing igniter, a dirty flame sensor, or a gas valve issue. These are common and usually repairable. We test the ignition sequence end to end and flag anything that touches the gas train as a job for a trained professional, which it is.

Safety Checks Before the Repair

Any gas furnace visit includes a look at the heat exchanger and venting, because a cracked exchanger can let combustion gases into your home. This is exactly the kind of check we won’t skip. It protects your household, and it’s part of doing the job right.

Furnace Tune Up

Furnace Tune Up is the focused service visit that cleans, tests and adjusts your heater so it runs efficiently and safely through the season, and it’s worth booking before the cold arrives. In San Mateo, where the heating season is mild but long, a furnace that’s been neglected for a couple of years can lose efficiency quietly. Our technicians clean the burners and blower, check the flame sensor and igniter, verify the safety controls and confirm airflow, then hand you a written report of what we found. A tune-up in San Mateo typically costs $95 – $235, with the written estimate setting the final price. Technicians are not paid on what they sell.

Best Time to Book

Late fall, before the first stretch of cold nights, is ideal, because that’s when you want the system checked rather than discovered to be failing. Booking early also means an easy appointment instead of a scramble. It’s the simplest way to avoid a no-heat call in January.

professional furnace repair service in San Mateo, CA

What the Tune Up Prevents

Regular tune-ups catch worn belts, dirty sensors and airflow problems before they turn into breakdowns. They also keep the system running closer to its rated efficiency. A little upkeep now saves a bigger repair later.

Emergency Furnace Repair

Emergency Furnace Repair is for the no-heat calls that can’t wait: the furnace dies on a cold night, the house is dropping toward uncomfortable, or a system is making a noise or smell that worries you. In a mild climate like San Mateo a failed heater is rarely life-threatening, but for infants, older adults and anyone with health concerns, a cold house is still a real problem, so we treat it that way. We answer 24/7, and we dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Emergency-type repairs typically run $175 – $825, with the written estimate setting the final price.

What Happens When You Call

Tell us what the furnace is doing and what make it is so we arrive with the right information. We prioritize no-heat calls and dispatch a technician as quickly as we can. Fast dispatch runs from 7am to 7pm, Sunday through Friday.

Safety First on a Gas System

If you smell gas or see soot or scorching, shut off the gas if you can do so safely and air out the house before calling. Don’t keep resetting a furnace that keeps tripping. A trained technician should look at anything involving the gas side or combustion.

Brands We Service

We work on the brand you already have, not just the ones we sell. Rheem furnaces are common in this area, and we know their ignition and control-board quirks well enough to diagnose quickly. York systems bring their own patterns, especially around the blower and limit switches, and we’ve serviced enough of them to recognize the usual failure points. Daikin equipment, including its heat pump lines, rewards a technician who understands inverter controls and multi-stage operation. Bryant furnaces are widely installed in Bay Area homes, and we’re comfortable with their control boards and airflow setup.

That breadth matters because a brand-agnostic approach means the recommendation you get is based on your home and your budget, not on a dealership agreement or a manufacturer incentive. We don’t favor one make over another; we diagnose the system in front of us and tell you what it needs. Whether you have Rheem, York, Daikin, Bryant or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • You smell gas. A rotten-egg smell near the furnace is a safety issue, not a wait-and-see. Shut off the gas if you can do so safely, get out, and call right away. Gas problems belong to a trained technician, always.
  • The furnace runs but doesn’t heat. Air that stays cool while the system runs usually points to an ignition or flame-sensor fault. It won’t fix itself, and continuing to run it wastes fuel. This is a clear same-day call.
  • You hear banging, rattling or screeching. Loud noises often mean a failing blower, loose component or worn belt. Left alone, small noises turn into bigger repairs. Get it checked before it fails completely.
  • The system short-cycles. A furnace that turns on and off every few minutes is usually fighting a limit switch, airflow problem or oversized unit. Short-cycling wears parts out fast and runs up your bill.
  • Soot, scorch marks or a yellow flame. A healthy gas flame is blue; yellow or sooty signs suggest incomplete combustion, which needs professional attention. This one carries real safety weight, so don’t put it off.

Our Process, Step by Step

  1. 1
    We take your call and get the details. We ask what the furnace is doing and what make it is so we arrive prepared. That saves time on the diagnosis.
  2. 2
    We diagnose before we recommend. A technician tests the system in sequence, from the thermostat signal through ignition, blower and safety controls, and uses combustion and airflow readings to confirm what’s actually wrong.
  3. 3
    We explain what we found in plain language. You hear the diagnosis and the options, without a sales pitch. Honest assessment comes before any recommendation.
  4. 4
    You get a written estimate. The price is set per job by the written estimate, so there are no surprises. You approve it before any work starts.
  5. 5
    We make the repair and confirm it’s running right. After the fix we test the system to make sure it heats properly and safely. If a replacement makes more sense than a repair, we’ll tell you, and we can pair that with furnace repair or a coordinated furnace repair conversation about matching your heating and cooling.

How Much Does Furnace Repair Cost in San Mateo?

Furnace repair in San Mateo typically runs $175 – $825, depending on what’s actually wrong and which parts are involved. A straightforward fix, like a flame sensor cleaning or a thermostat adjustment, usually lands near the lower end. A failed blower motor, control board or heat exchanger issue pushes toward the higher end because of the parts and labor involved. If you’re looking at a full replacement instead, that’s a separate conversation, and we’ll walk you through the options.

Several things move the number. The age and make of the system matters, since parts for older or less common units can take longer to source. The type of fault matters more: an ignition problem is usually quicker to diagnose than an intermittent electrical issue. Access to the unit can add time if it’s tightly installed. What we won’t do is pad the bill with parts you don’t need, and because we’re not tied to a single brand, our recommendations come from your home’s needs, not a dealership quota.

To avoid overpaying, get the diagnosis first and ask what the estimate covers, including parts and labor. A free estimate from us includes the diagnostic findings, a clear explanation of the repair, and a written price before you commit. The written estimate sets the final price, so there’s nothing tacked on afterward. Call (866) 260-3183 for an exact quote. Estimates are free. We answer 24/7.

Our Service Area Near San Mateo

We serve San Mateo and the surrounding Peninsula and South Bay communities, including Hayward, Sunnyvale, Fremont, Santa Clara, Saratoga, Burbank, Campbell, Monte Sereno and Los Gatos. Response times vary by location and how busy the day is, but we prioritize no-heat calls and dispatch from 7am to 7pm, Sunday through Friday. Whether you’re nearby or a little further out, the same trained HVAC specialists handle the work. Heating and cooling is all we do, so you get a specialist on every call.

Serving San Mateo, CA – Our Local Coverage Area

We serve San Mateo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Furnace Repair in San Mateo

Schedule Your Furnace Repair Service in San Mateo Today

If your furnace isn’t heating the way it should, don’t wait for it to fail completely. Call (866) 260-3183 for a free, no-obligation estimate from a team that does heating and cooling and nothing else. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Honest assessment first, written price before any work, and nine major brands covered. One call is all it takes.

Written by the team at AC Repair San Mateo.

Why San Mateo Chooses AC Repair San Mateo

We set the standard for furnace repair in San Mateo.

30-60 Min Response

Fast dispatch across San Mateo, 7am-7pm. Same-day service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in San Mateo

Getting your furnace repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your furnace repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in San Mateo - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local furnace repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically the same day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What San Mateo Customers Say

Trusted by homeowners across San Mateo and surrounding areas.

★★★★★

"Maintenance plan is actually worth it. They come twice a year, they show up, and the last visit caught a refrigerant leak before it turned into a July disaster."

Marcus Prince
★★★★★

"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."

Divya Reddy
★★★★★

"Blower motor on a 12 year old furnace. He gave me the honest math on repair versus replace and did not push me toward the bigger ticket. We repaired it and it's been fine."

Gilbert Hernandez

Ready for Furnace Repair in San Mateo?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in San Mateo.

(866) 260-3183

Request a Free Estimate in San Mateo

Tell us about your furnace repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7