AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across San Mateo
When your heat quits in San Mateo, you need a straight answer fast, not a sales pitch. We handle furnace repair across San Mateo with free estimates, same-day service in most cases, and technicians who have up to 9 years of experience. We know this town’s older housing well: the stucco bungalows in North Central, the small ranches around Hayward Park and the Aragon area, and the fog-dampened crawlspaces that cause furnace problems you won’t find inland. Call (866) 260-3183. We answer 24/7. Fast dispatch from 7am to 7pm.
Why San Mateo Homeowners Call AC Repair San Mateo for Furnace Repair
Heating and cooling is all we do. That narrow focus means the technician at your door diagnoses furnaces every working day, not once a month between plumbing calls. San Mateo homeowners call us because they want an honest assessment before any recommendation, and because our recommendations follow your budget and your house, not a single-brand dealership agreement.
We work on the brand you already have. Rheem, York, Daikin and Bryant systems are all in scope, along with every other major residential furnace, so you’re not told your equipment can’t be serviced because it wasn’t bought from us. Same-day service is standard for us when the call comes in, and every job ends with a written estimate that sets the final price. We serve San Mateo and the neighborhoods around it, and we’d rather tell you a repair isn’t worth it than sell you one that won’t last.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair in San Mateo
Heat Pump Repair in San Mateo comes up more often than it did a few years ago, as homeowners here weigh heat pumps against gas furnaces under California’s gas-appliance phase-out. A heat pump job usually means tracing refrigerant charge, checking the reversing valve, and testing the defrost cycle, because a unit that heats poorly in our mild winters is often short on charge or stuck in the wrong mode. Typical heat pump repair in San Mateo runs $175 – $825, and the written estimate sets the final price.
What a Heat Pump Diagnosis Covers
We check refrigerant pressures, the reversing valve, the outdoor fan and the defrost board. On the cool west-side tracts above the fog line, summer afternoon heat spikes push these systems harder, so we test both heating and cooling modes before signing off.
When a Heat Pump Repair Makes Sense
If the compressor and coils are sound and the fault is a valve, board or charge issue, repair is usually the right call. If the compressor itself has failed on an older unit, we’ll walk you through replacement numbers before you commit.
Heating Repair in San Mateo
Heating Repair in San Mateo is dominated by gas furnaces, because most homes here need little or no air conditioning and the heating load does the heavy lifting. A typical call involves testing the ignitor, checking the gas valve, inspecting the blower motor and capacitor, and looking hard at the heat exchanger, since corrosion is the failure mode that matters most in this climate. Typical heating repair in San Mateo runs $175 – $825, and the free estimate spells out exactly what’s wrong before any work starts.
Gas Furnace Faults We Track Down
Short cycling, cool air from the registers, a furnace that trips the breaker, or a blower that runs but never heats: each one points to a different part of the system. We test components in order rather than guessing, so you pay to fix the actual fault.
Ignitors, Gas Valves and Blower Motors
These are the three parts we replace most on older San Mateo furnaces. Ignitor and gas valve work is gas work, so it belongs with a trained technician, never a homeowner with a wrench.
Trusted Brands We Service in San Mateo
We’re certified to install and service nine leading HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard. That matters in San Mateo because the furnace in your North Central bungalow might be a Rheem, the one in a 1970s west-side tract a Bryant, and the next call a York or Daikin. We don’t stock parts on a truck, but our brand coverage means a faster diagnosis and a faster path to the right part, whether it’s a common ignitor or a specific control board. One specialist team, nine brands, no brand loyalty steering the recommendation.
Common Furnace Repair Problems We See in San Mateo Homes
In many San Mateo bungalows, a furnace that short-cycles or blows cool air traces to a failing capacitor or a rusted heat exchanger, especially when the unit sits in a fog-dampened crawlspace. A qualified technician tests the capacitor, inspects the heat exchanger for corrosion, and checks flue integrity before recommending a like-for-like swap that may not solve the underlying duct or venting problem. The faults below are the ones we run into most.
- Corroded heat exchangers. Coastal fog keeps crawlspaces damp, and that moisture corrodes heat exchangers from the outside in. It’s a failure mode rarely seen in drier inland Bay Area cities, where the same furnace lasts longer.
- Leaky, undersized ductwork. Original gravity and early forced-air ducts in the flats are often uninsulated, undersized or leaking. That drives up static pressure and causes short cycling even when the furnace itself is healthy.
- Rusted flue pipes. Single-wall and undersized flues in older homes rust through in our damp winters, which turns a venting problem into a safety concern. Combustion venting isn’t a DIY check.
- Undersized electrical panels. Many pre-war and mid-century homes weren’t wired for a modern furnace, let alone a heat pump. Before any upgrade, the panel needs a look, and that’s licensed electrical work.
Pricing for Furnace Repair in San Mateo, CA
A typical furnace repair in San Mateo runs $175 – $825. That range covers most single-component fixes (ignitor, capacitor, gas valve, blower motor) and reflects real San Mateo labor and parts costs. A like-for-like replacement that turns into duct sealing or flue work will land higher, which is why we inspect the whole system before quoting. The estimate is free, and the written estimate sets the final price, so there are no surprises when the work is done. Here’s how the sub-services compare.
| Service | Typical Estimated Range |
|---|---|
| Furnace Repair | $175 – $825 |
| Heating Repair | $175 – $825 |
| Heat Pump Repair | $175 – $825 |
| Furnace Tune-Up | $95 – $235 |
For comparison, a full AC installation on the cooling side runs $4130 – $8850, and if you’re pairing a furnace upgrade with new cooling, we can match the equipment so the two systems work as one. Call (866) 260-3183 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Older San Mateo Homes Need More Than a Swap
Here’s the part a lot of homeowners learn the hard way. A like-for-like furnace swap in an older San Mateo house often disappoints, because the furnace isn’t the only problem. The real issues are usually a corroded heat exchanger from fog-driven moisture, leaky or undersized ducts that choke airflow and cause short cycling, and electrical panels too small for the equipment a modern home wants. Replace the furnace without addressing those, and the new unit inherits the same faults. That’s why we inspect the whole system, not just the box that failed. We’d rather show you the duct leakage and the flue condition before you spend money on a swap that won’t fix the underlying cause.
San Mateo sits in the fog-cooled band where most homes need little or no air conditioning, so HVAC work here is dominated by heating replacement, furnace and duct retrofits, and increasingly heat-pump conversions. The low-lying flats near downtown and the bay are the toughest, with tight crawlspaces and rusted flue pipes that sunbelt contractors never see. The higher west side, above the fog line, hits summer afternoon heat spikes that make zoned systems and heat pumps more attractive.
Safety First on Gas and Venting Work
Heat exchanger corrosion, flue pipe rust and gas valve faults are genuinely dangerous if handled wrong. Carbon monoxide from a compromised heat exchanger or blocked flue is a real risk in tightly sealed older homes. We test for it as part of every furnace call and recommend a trained technician for anything involving gas piping, combustion venting or electrical panel work. If you smell gas, leave the house and call your gas utility first. Then call us at (866) 260-3183 for the repair.
We Also Serve Cities Near San Mateo
We serve San Mateo and the surrounding Peninsula and South Bay cities, including Hayward, Fremont, Sunnyvale and Santa Clara. If you’re just outside our primary area, call and we’ll let you know whether we can reach you. Our furnace repair team covers the same brands and the same furnace-focused work across the region. You can also read more about how we serve San Mateo specifically.
Serving San Mateo, CA – Our Local Coverage Area
We serve San Mateo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in San Mateo
A furnace that trips the breaker usually has a shorted blower motor, a failing capacitor or a wiring fault, and it needs a technician rather than a bigger breaker. Breakers trip because something downstream is drawing too much current or shorting to ground, and putting in a larger breaker hides the fault instead of fixing it. Call (866) 260-3183 for a free estimate.
Yes. A rusted flue pipe can let combustion gases escape into the house instead of venting outside, which is a carbon monoxide risk. Coastal fog and damp winter air rust single-wall and undersized flues from the inside out, and it’s the failure we check for on nearly every older San Mateo furnace. Call us for a venting inspection.
Sometimes they can be sealed, but many original gravity ducts in the flats are undersized for modern forced-air equipment and need partial replacement. The only way to know is to measure airflow and static pressure. Call (866) 260-3183 and we’ll inspect the ductwork before quoting.
Most furnace repairs in San Mateo run $175 – $825, with the written estimate setting the final price. The low end covers a single part like an ignitor or capacitor; the high end covers a more involved fix such as a gas valve or blower motor. Estimates are free.
Short cycling after a thermostat swap usually points to high static pressure from leaky or undersized ducts, or an overheating limit switch, not the thermostat. Replacing the thermostat masks the symptom, not the cause. A technician needs to measure airflow and inspect the ductwork to find the real fault. Call (866) 260-3183.
Call AC Repair San Mateo for Furnace Repair
If your furnace is short-cycling, blowing cool air, tripping the breaker or just not keeping up, call us. We’ll test the components, inspect the heat exchanger and flues, and give you a free written estimate before any work begins. We serve San Mateo and the surrounding cities, work on the brand you already have, and won’t push a replacement you don’t need. Call (866) 260-3183. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at AC Repair San Mateo.